MDCrack is a security tool designed to attack various hash algorithms at a very fast rate.
This tool is provided to assist pen-testers, system administrators and users in testing their own passwords, or other passwords for which they have been given permission to test, in order to determine the security of such passwords.
it is not intended to assist with breaking local and remote hosts and accounts.
I hereby disclaim any responsibility for illegal actions taken based on this software.
This software is by no mean a virus/trojan/malware as suggested by some anti-virus products like Mcafee that labels it as potentially unwanted.
However, note that if you were to find a MDCrack process unexpectedly running on your server like it has been reported by some people, then your system has likely been compromised and is being exploited.
In such a case, please do not blame MDCrack but rather fix your security holes.
Also, take the time to check the file MD5 signature available on this site to avoid using a tampered version.

Warranty and limitations of liability


Well to make it brief, use it at your own risk and please, in a legal manner

About MDCrack

MDCrack is a free featureful password cracker designed to bruteforce several commonly used hash algorithms at a very aggressive speed rate.
It can retrieve any password made of up to 16 characters and allowing up to 55 characters with an additionnal user salt.
In order to achieve the highest possible speed rate, this program uses several cores for each algorithm it supports.
Each one of these cores provides a different level of optimization dynamically selected at run time to best adapt with changing candidates length.
To date, this program supports bruteforce attacks for 21 algorithms: MD2, MD4, MD5, HMAC-MD4, HMAC-MD5, FreeBSD, Apache, NTLMv1, IOS and PIX (both enable and user) hashes,
Invision Power Board 2.x (IPB2), MD4MD4, MD4MD4S, MD5MD5, MD5MD5S, PHP, PHPS, CRC32, CRC32B, ADLER32 the list of algorithms is growing up.
Multi threading allows for parallel cracking, distributing workload between available CPUs and thus multiplying overall speed by the number of processor(s) used.
This yields to phenomenal performance with the advent of multi-cores CPUs design and even on the old generation of multi-CPUs systems.
Several options offer fine tuning for the attack and allow to save and resume your session at a later time.
This program has multiple uses in real life, while its primary goal is obviously to test the strength of hashed passwords,
it can also be used as a raw benchmark tool for integer calculs.
For any question you may have, please be sure to first read the Frequenty Ask Questions file (FAQ) provided in MDCrack ZIP file.
I hope you will enjoy this program.

Latest News

Apr 29 2007.

Version 1.8(3).

That was quite a long time but here it is. This minor update includes following new features and modifications:

Improved Win32 support

  • MDCrack will try to register the .mds file extension with its own executable name and icon
  • Default session filename has been renamed "latest.mds", thus double clicking on it will resume the latest.mds saved session
  • Note that the .mds suffix won't be automatically set to your session filename, either specify it at the command line or rename your old session files

Bug fixes

    This new release comes with its usual truck load of bug fixes. As always your bug reports are very appreciated and useful to make this program better. Feel free to send them at mdcrack@videotron.ca Thank you.

All cores (all algorithms) upgraded

    All cores have been improved to support up to 16 characters candidates (55 if adding a custom salt set with the --prepend and --append options). Also default maximal candidate size has been changed accordingly, use the --maxsize and --minsize options to override with your own limits if necessary.

CRC32 CRC32B ADLER32 cores added

    While these hash algorithms are not really related to passwords security, i thought they could prove useful in some situations and would be, at the very least, interesting to implement and evaluate. They can most likely be optimized deeper but i won't spend too much time on this. If you wish to share your work on any of these algorithms, please contact me. Also note that because they produce very short in size hashes (32bits) you might well collide before testing the expected candidate. In this situation, use this mysterious --all command line option and MDCrack will simly resume its work after each new found collision. Well, now there is a justification for this option :)

Cores loader design improved

    All cores can be dynamically loaded at runtime allowing MDCrack to choose the best optimized core for a given candidate. Using this approach, all currently supported algorithms can be further optimized. For now, only the CRC32 CRC32B and ADLER algorithms fully exploit this new design while all other algorithms will eventually follow but gradually. (you can try "mdcrack-sse --algorithm=CRC32 --test-hash" as an example)

Feb 25 2007.

Version 1.8(2).

*Nix users may want to know that MDCrack has been reported working fine with Wine for Linux (reported by N.Spohrer)
More information on Wine can be found here

This update includes following new features and modifications:

Zip package

  • Lr4.exe decoder has been added to the MDCrack package
  • Faq has been updated to reflect some of the changes, still very incomplete though (lack of time)
    Some good souls around willing to help ?

Bug fixes

  • Closing the console at runtime won't trigger a system popup anymore
  • Session related command line options (session, resume, delete, autosave etc...) were sensitive to their order of appearance in the command line. This could lead to inconsistent and somewhat confusing results for some command line configurations. As for now, "session=FILE" option globally set the default session filename for the whole command line while it can be overridden locally for each option (if a FILE argument is available).
  • Accuracy for algorithms auto-detection feature has been improved (can be tested with --guess option)
  • For sessions using a color scheme, a new console is spawned thus leaving the original one untouched and clean.
  • One could not add a comma to the custom charset string since comma was also the suboptions separator. There is no more suboptions separator, predefined character subsets can be inserted anywhere along the charset string using the %x metacharacter notation where x denotes a specific character subset. Just repeat % twice (%%) to specify a % character.
    Currently available predefined character subsets are:
    %U (all upercase alpha) %L (all lowercase alpha) %P (all punctuation) %N (all numericals) %C (all control characters)
  • Several memory leaks have been fixed
  • Other few minor bug fixes...

Non printable characters

    Non printable characters can be easily used within custom charsets and salts using a #nn notation, where the 'nn' part designates the hexadecimal value of the character. Use a double '##' to specify a # character alone.
    Try --charset=%C as an example.

Syslog / output / detach options

    MDCrack now supports builtin redirection of its output to a file or a syslog server for local and remote monitoring. Also a --detach option allows for closing the console without terminating the process. The builtin syslog client offers ability to setup syslog severity filter, syslog facility, server address, protocol and port number.

Runtime commands

    Several keyboard shortcuts allow control and monitoring at runtime

  • Esc: Shortcuts summary
  • F[1-5]: Change process priority, F1 for IDLE ... F5 for HIGH
  • F10: Autosave on/off switch
  • F11: Change color scheme
  • F12: Fullscreen on/off switch
  • Enter: Show process information
  • Space: Show thread(s) statistics
  • Ctrl-c: Interrupt current session

Dec 30 2006.

New companion tool, Lr4.

Tool added.

Lr4.exe is a small console based companion tool for decoding of Loginrecovery V4 dump files.
Hash entries dumped from the floppy disk (version 04) are shadowed and unusable with free tools such as MDCrack and John.
This tool decodes and formats LR dump files in the familiar Pwdump style thus recovering your informations for offline cracking with your favorite tool.
Also its small size allows it to conveniently live on the same loginrecovery floppy disk.
See Lr4.exe --help for a list of all available command line options.

Dec 17 2006.

Version 1.8(1).

This minor update includes the following modifications:


The process of benchmarking has been speeded up due to the removal of the tests using --prepend and --append salt options.
However all natively salted algorithms (eg: FreeBSD) are obviously still salted during the process but are now tested only once.
This change was made because the use of --prepend and --append options were not significantly impacting the performances.
If you wish to test each algorithm several time in a row for better accuracy, use the PASS argument in --benchmark=PASS.

New PHP cores

Two cores have been added to support generic "PHP" algorithm based upon a MD5(hex(MD5(pass))) function.
It is basically the same algorithm as MD5MD5 except that the inner hash is hex encoded before being hashed.
Use --algorithm=PHP at command line.

New PHPS cores

Two cores have been added to support generic "PHPS" algorithm based upon a MD5(hex(MD5(pass)).salt) function.
Same as MD5MD5S with a hex encoded inner hash.
Use --algorithm=PHPS at command line.

Bug fix for IPB2 cores

One password out of 2 couldn't be correctly found because of a small bug in these two cores.
This issue has been fixed and IPB2 cores have been also optimised a bit further. (~ +6% faster on a 1xP4 1.66)

Dec 10 2006.

Version 1.8.

Some few changes

Session file format has been reworked:
Verbosity has been removed and must now be manually reset when resuming a session.
eg: mdcrack-sse --resume --verbose=very
Added: a salt field to support new algorithms (MD5MD5S MD4MD4S IPB2).
Added: option --show to show content of a session file without resuming it.

Several new cores have been written, see below for details.
Please do not forget to refresh the performance table by sending your benchmarks.

New MD5MD5 cores

Two cores have been added to support generic "MD5MD5" algorithm based upon a MD5(MD5(pass)) function.
Use --algorithm=MD5MD5 at command line.

New MD4MD4 cores

Two cores have been added to support generic "MD4MD4" algorithm based upon a MD4(MD4(pass)) function.
Use --algorithm=MD4MD4 at command line.

New MD5MD5S cores

Two cores have been added to support generic "MD5MD5S" algorithm based upon a MD5(MD5(pass).salt) function.
These cores need a salt that can be provided through the --salt command line option.
Use --algorithm=MD5MD5S at command line.

New MD4MD4S cores

Two cores have been added to support "MD4MD4S" algorithm based upon a MD4(MD4(pass).salt) function.
These cores need a salt that can be provided through the --salt command line option.
Use --algorithm=MD4MD4S at command line.

New IPB2 cores

Two cores have been added to support Invision power board hashing algorithm based upon a MD5(hex(MD5(salt)).hex(MD5(pass))) function.
These cores need a salt that can be provided through the --salt command line option.
Use --algorithm=IPB2 at command line.

Nov 26 2006.

Version 1.7.5 is a maintenance release including several bug fixes and some new features.

What's new in 1.7.5 ?

Bug fixes

Following issues have been reported by users.

  • Benchmarking with 10 passes per algorithm would eventually crash MDCrack because of a heap corruption.
  • When launched with multiple threads, MDCrack was ignoring the requested minimum size for candidates and was starting a session with candidate size set to 1 character.
  • Benchmark priority has been reduced to NORMAL by default in order to make the process more responsive to interruptions.
  • Some other minor problems in MDCrack and Cis7

These issues have been fixed.

Features added

Following features have been added.

  • MDCrack now tries to auto-detect algorithm of hash provided from the command line, this means you can avoid using --algorithm option in much cases
  • MDCrack's command line interface has been improved with the use of long options and sub-options for better clarity, FAQs have also been modified to reflect the changes.
  • Users's custom charsets can now be easily written using built-in character subsets (eg. %L for all lowercase alphanumerics), see option --help for a complete list of subsets.
  • Option '--test-hash' will use one of MDCrack's built-in hash instead of a user defined hash (the same built-in hash used during a benchmark). That allows easy testing of the various available options.
  • Option '--autosave' will periodically save session during runtime thus protecting all the hard work from a system failure
  • Cis7 command line interface has also been upgraded with long options. A new '--file' option can import and decode ciphertexts directly from an IOS configuration file

Oct 30 2006.

Version 1.7 is available.

What's new in 1.7 ?

Several bug fixes

Following issues, related to the handling of saved sessions, have been identified.

  • Under scenarios involving the use of a prefix salt, saved last candidates were being corrupted
    and saved sessions were irrelevant afterward.
  • A similar bug, specific to NTLM1 algorithm, was corrupting the saved maximum candidate size.
  • HMAC based sessions couldn't be interrupted and later resumed since their nonces were not being saved at all.

These issues have been fixed.

Cisco IOS

6 new cores have been added in order to support FreeBSD MD5, Apache MD5 and Cisco IOS algorithms.
All of them are based on FreeBSD implementation of MD5, involving a salt and ~1000 MD5 iterations.
So do not expect millions of hash per second,
at least till a network-distributed version of mdcrack has been released

Send me your benchmarks here to refresh the performance table.

Tool added to
MDCrack Zip file

Cis7.exe is a small satellite tool for en/decoding of Cisco passwords type 7.
Passwords type 7 are an implementation of Vigenere used by Cisco IOS to protect configuration passwords from unwise eyes.
This algorithm is known to be weak for more than a decade now and despite the much more robust alternative proposed by Cisco and based on FreeBSD MD5, it is not uncommon to see router passwords stored in this format.
More info at cisco.com
The pletoria of tools i have been able to test failed to correctly decode large passwords or passwords encrypted with a large seed (eg: 4578702849070453)
and so i wrote mine.
You can download Cis7.exe here, use "Cis7 -h" on the command line to get a little bit more info...

Oct 18 2006.

Version 1.6 is available.

Below is a change summary for version 1.6:

Several bug fixes

  • Some errors have been accidentally inserted in MD4 and MD5 cores during the process of rewriting the old version 1.2
    These errors could, for instance, prevent MDCrack from correctly finding a MD4/MD5 collision if used with a prefix salt.
  • Another bug prevented MDCrack from selecting some MD5 cores 3 leading to some sessions unexpectedly aborting.

All these issues are now fixed.
Please report any other problem you may find here

New HMAC Cores

8 new cores have been added in order to support HMAC-MD4 and HMAC-MD5 algorithms.

Use option -D to specify a HMAC message/nonce.
Send me your benchmarks here to refresh the performance table.

Sept 08 2006.

Faq updated.

Sept 06 2006.

It has been a long time (actually years) since the 1.2 version, too long for all the exciting work still in pending state. So MDCrack is back from the dead.
Also these few web pages were getting old and needed a refresh.
For the sake of clarity and simplicity, all information related to this project is now accessible from this single web page.
Most of the old web site content has gone away however you can still download part of the old stuffs here.
As ever this software is free, donations are now accepted and very much appreciated.
As ever your suggestions, bug reports and benchmarks are also very much appreciated.

About the new 1.5 version:
This new version is based on a complete rewrite of the now old 1.2, it includes a lot of new features along with an impressive performance gain versus the 1.2.
At this time 1.5 only supports Win32 platforms, that includes Win XP, Win2K and probably Win NT. (The later being untested, please report any problem you may have here)
Vista should be ok but has not been tested yet, if you test it please send me an update. (confirmed by A.Masalskis, see perf table)
A version for Linux and FreeBSD might be done in the future but is currently not on the top of the stack.

Below is a summary of all the great new features for this 1.5 version:

New Package format

The new release is provided as a zip file made of a FAQ and a binary optimized with Intel SIMD extensions, MMX SSE and SSE2, but nevertheless compatible with older processors through an auto-detect feature.

New command line options among which...

  • Charset random generation
  • Charset random mix up
  • Candidate maximum size limit
  • Candidate comparison count limit
  • User defined first candidate
  • User defined session filename
  • Console color schemes
  • Console full screen
  • and several other options...

Detailed statistics at runtime

Several people have complained about the lack of information provided during a session. Indeed, except for the size of tested candidates, nothing was reported during a session runtime. This new release allows to get threads statistics at runtime by simply pressing a key, these statistics are very verbose but do not penalize cores performance (or marginally). As a result you now have a mean to know exactly, thread by thread, which candidate is being tested, which core is being used, the average speed, an estimation of the remaining time before keyspace depletion etc...

better support for Win32

As you have surely noticed it, the console interface of the latest (and first) win32 release was a bit rustic not to say hostile. It was basically a raw port from the original Unix based 1.2 version to Windows. This new version best supports Microsoft operating systems with a set of options to configure process priority, process console, saved sessions and multi-threading.

New benchmarks interface

The process of benchmarking all cores one by one could be somewhat boring. It has been automated and improved to get the best of all algorithms from a single command line. Because MDCrack is very CPU intensive these benchmarks can also be used, in a more general way, to rawly evaluate and compare CPU(s) speed for integer based calcul.

Support for MultiCPUs

MDCrack now makes use of Windows threads implementation. It supports parallel cracking and load sharing between up to 8 CPU/threads and, de facto, increase your overall speed performance by as many CPU(s) you wish to provide for your session. Note that MDCrack lets you fix the total number of threads and also offers support for automatic threads mask affinity that glues each one of the threads to a dedicated CPU. A first stone to the still to come network distributed version.

New NTLM1 Cores

4 new cores have been added to get optimal speed from different candidate/salt scenarios. This translates for instance by a 100% speed gain for 9 characters candidates on a Pentium IV versus 1.2 version. See the performance table below for details. These cores can be used to test Microsoft passwords used in the old fashion (but still in use) authentication scheme NTLMv1. Note: I will most probably write some cores for HMAC MD5 and its unicode variant (NTLMv2) one day or another, check this page frequently for an update.

New PIX Cores

2 new Cores dedicated to test Cisco PIX Firewalls passwords for both Enable and Users accounts. (work for all versions including latest 7.x images) Note: PIX Users accounts are used to grant access to the firewall itself or the services it provides like VPN and web access and can therefore be interesting targets for an attacker seeking to compromise your private network or to bypass your security policy.

New MD2 Cores

4 new Cores to test MD2 hashed passwords. There might still be work to be done in order to get optimal speed performance for these 4 cores. Althought MD2 was originally designed and optimized for 8 bits architectures, i may have overlooked something on the way and frankly i hope so. If someone has some great ideas in regard to MD2 optimization on a 32 bits architecture, please contact me

How does it compares with previous releases and at which speed rate can i expect to run it on my system ? see performance table


Current version is 1.8(3)

Before downloading, be sure to read and understand the legal notice

Always take care to look at the provided MD5 signatures (below) preferably on this site prior to execute MDCrack, especially if you download it from elsewhere.
If you don't already have a tool to proceed, you may want to try this free one from http://www.fourmilab.ch/.
If you want to redistribute this release, please also provide these MD5 signatures or at least a link to it.

MDCrack 1.8(3) -- Win32 -- Zip file (Contains FAQs and binaries)

MD5 signature -- b401be875677b43792902f4f72253674 mdcrack-183.zip

MD5 signature -- c678f3defc8462c64d77efc7b52a113d mdcrack-sse.exe

MDCrack 1.83 -- FAQ 1.8 (TXT)
MDCrack 1.83 -- FAQ 1.8 (HTML)

Lr4 1.0 (also included in MDCrack zip file)

MD5 signature -- 05be81c4a5997367242f197e4d1bc694 lr4.exe

Cis7 1.2 (also included in MDCrack Zip file)

MD5 signature -- ec22a038dccc806281d9d233f1683ddd cis7.exe


Following table is mostly updated with your benchmarks; If your configuration doesn't already appear in this list, please email me yours.
If you have a multi-CPUs system or any modern CPU like Intel core 2 duo and AMD X2 at hands, i would be very interested to get a copy of your benchmarks.
Other benchmarks based on older single CPUs are also welcomed but preferably not too old (PIII or above).
Do not hesitate to contact me if you think an error has been introduced in this table.

Since version 1.7.5, use "mdcrack-sse --benchmark" on the command line to produce a benchmark.
When it starts the tests, MDCrack automatically creates as many threads it finds CPUs in your system with a default NORMAL process priority in order to keep responsiveness for interruptions.
It would be wise to close all other greedy applications before starting the process to achieve best result.
Note that even if the program will let you change several default parameters such as timer, process priority and the number of threads from the command line;
You are discouraged to proceed so with benchmarks you send because it may lead to sub-optimal speed reports.
Just wait the few minutes that takes, copy/paste and send your email.. that's all

Thank you.

This table reports speed performance by version and system configuration for each algorithm best core (core 1 when available).
For those who may wonder, cores speed is expressed in hashes per second (h/s), this is the same as comparisons per second or candidates per second (c/s).
Each hash is computed from a candidate before being compared with the target hash therefore all three aforementioned measuring units are identical for MDCrack.
The same remark does not apply for every password cracking software, some of them accept several targets in the same process and thus may perform several comparison with a given candidate hash.
In order to avoid confusion and get the real picture, speed performance is expressed here in hashes per second.

PIX Enable and PIX User Cores give almost identical benchmarks and this is no surprise because Cisco hash format for PIX users is a salted version of Enable hash
with some few other modifications though.

The real surprise comes from MD2 benchmarks where Intel CPUs seem to outperform AMD.
Hopefully some optimization may still be possible but, meantime, let's wait for more benchmarks from more recent CPUs ...

MDCrack CPU System Period (s) MD2 (h/s) MD5 (h/s) MD4 (h/s) NTLM1 (h/s) PIX Enable (h/s) PIX User (h/s) HMAC-MD5 (h/s) HMAC-MD4 (h/s) FreeBSD (h/s) IOS (h/s) Apache (h/s) Binary / Compiler
1.7 2x XEON 3.2GHz (DC + HT) Win XP Pro 5 1 884 043 42 299 451 68 475 279 61 791 052 31 790 823 29 875 043 3 823 043 5 737 982 13 816 14 104 13 887 mdcrack-sse
1.7 1x AMD X2 4200+ 2.28Ghz (DC) WinXP Pro SP2 5 432 274 20 875 320 34 731 624 32 792 140 15 402 937 15 408 374 2 876 551 4 333 737 11 618 11 636 11 477 mdcrack-sse
1.7 1x P4 2Ghz (DC) WinXP Pro 5 444 013 19 963 045 33 289 080 31 584 267 15 175 891 15 166 281 2 995 789 4 552 167 12 270 12 551 12 298 mdcrack-sse
1.7 1x P4 2.41GHz Win XP 5 433 371 7 037 468 10 641 954 9 610 838 5 190 657 5 181 395 856 343 1 293 849 3 765 3 956 3 748 mdcrack-sse
1.5 2x XEON 3.2GHz (DC + HT) Win XP Pro 5 1 884 043 42 299 451 68 475 279 61 791 052 31 790 823 29 875 043 mdcrack-sse
1.5 2x XEON 3.6Ghz (HT) Win 2k 5 1 265 337 26 855 210 41 117 627 39 397 498 18 365 742 19 039 391 mdcrack-sse
1.5 1x AMD X2 4800+ 2.42Ghz (DC) Win XP 5 476 736 22 995 292 38 880 061 36 206 314 17 037 139 17 081 129 mdcrack-sse
1.5 1x P4 1.66Ghz (T2300) (DC) Win Vista RC1 5 389 990 14 414 805 23 179 434 22 074 546 10 514 795 10 425 183 mdcrack-sse
1.5 1x P4 3Ghz (HT) Win XP 5 453 196 11 021 967 17 243 695 16 447 991 8 180 054 8 180 109 mdcrack-sse
1.5 1x AMD XP-mobile 2.32Ghz Win XP 5 228 974 10 090 138 16 093 819 15 884 568 7 103 820 7 104 434 mdcrack-sse
1.5 1x AMD64 3000+ 2Ghz Win XP 5 195 786 9 397 021 15 766 544 15 062 335 6 968 033 6 977 514 mdcrack-sse
1.5 1x P4 2.66Ghz Win XP 5 490 688 8 724 678 11 219 466 9 690 632 6 802 660 6 160 632 mdcrack-sse
1.5 2x P3 1Ghz Win 2k 5 233 623 7 989 055 12 366 112 11 937 637 5 672 357 5 675 329 mdcrack-sse
1.2 Athlon 1.8 Ghz Win XP Pro 27 5 808 949 9 334 967 5 489 462 Visual C++
1.2 Athlon 1.53 Ghz Win XP 10 5 080 455 8 503 911 4 800 505 Visual C++
* DC for dual core, HT for hyper-threading

Contacts and Acknowledgment

Author: Gregory Duchemin ( mdcrack@videotron.ca )

I would like to thank the following people for their work and kindness:

Simeon Pilgrim for his great work on MD5.
Solar Designer, author of John the ripper, for kindly providing MDCrack with a sweet home in Moscow.
Christophe Braud who took for him the burden to port version 1.2 to win32.
Karma, Dark Neo and NullAdd for sharing their frontends.
All the people who have made donation, sent bug reports, benchmarks and ideas...

Thank you!

Old stuff

Before downloading, be sure to read and understand the legal notice

FreeBSD and Linux Gentoo users, you may already have MDCrack 1.2 in your CDs, check in the ports list.
Sources in these ports have most probably been patched to best fit in your operating system, i would recommend to try them first.

Always take care to look at the provided MD5 signatures, preferably on this site, prior to use sources and binaries.

Below are links to sources and binaries for the previous 1.2 version.

Front ends ( 1.2 / Win32 release )

Source and binary ( 1.2 release )

  • Oct2004 --Author: C3rb3r
    MDCrackNG 1.2 -- win32 binary (Win 2K/XP) -- exe

    MD5 signature -- 5d65b2f3f32e5855e9b5f80aa39fa5c9

  • Nov 2003 -- Author: NullAdd
    NullAddFront end -- source vb/win32 binary -- zip file

    MD5 signature -- 1d57e37fc1cb1f04966d9dfe78b7d222

  • Sep 2003 -- Author: Karma
    MDcrackphp-- source php -- tar ball

    MD5 signature -- ea5e34df1bbec147d113543c448d27d2

  • Sep 2003 -- Author: Dark Neo
    MDcrackEasyLoader -- source vb/win32 binary -- zip file

    MD5 signature -- cd58b1d96710f749fd3d0515066227ce
  • Nov 2003 -- Update by Karma
    FAQ 1.2
    [ .TXT ]       [ .HTML ]

  • Aug 2001
    MDcrack 1.2 -- source C -- tar ball

    MD5 signature -- 53d23b73bb48a3e106b8ce748d6b2bb8

  • Aug 2001 -- Convertion by Christophe Braud
    MDcrack.exe 1.2 -- win32 binary

    MD5 signature -- f0f995fd6da3b72123284a8236839b10

  • Links

    Also take the time to visit these sites...

    BOOTP/DHCP audit tool    From the same author,
       DHCPing is a security tool for auditing DHCP servers.

    Owl project    Openwall GNU/*/Linux (or Owl for short),
       A security-enhanced operating system with Linux and GNU software as its core...

    Internet provider    Dataforce is a russian Internet provider,
       they have hosted MDCrack for years and for free.

    The largest security source on the Net    Packetstormsecurity,
       a very large collection of security stuff. A great site.


    If you like this software and can afford it, please consider making a donation.
    This project requires a huge amount of time; By making a donation you help keep MDCrack alive.
    If you want your name to show up in the donators list, in this web page, leave me a note through Paypal interface or send me an email.
    Thank you.